Widely Used 6s Shaking Table

• Type: Shaking Table
• Voltage: 380V
• Weight: 1T
• Material: Carbon Steel
• Material Feature: Heat Resistant
• Certification: ISO9001:2008, CE
• Model NO.: 6S
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Grey
• Customized: Customized
• Condition: New
• After-sales Service: Life Long Time
• Size: 12 Inch
• Installation: Engineer Guide
• Transport Package: Bulk
• Specification: 1500*30000mm
• Trademark: HK
• Origin: China
• Production Capacity: 10-100t/H

Product Description

Construction of shaking table:

Head Motion  The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.

Decks   The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50°C.

Feed and Water Box A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.

Base  A choice of ordinary type, groove steel support or big channel steel support is available.

Application of  shaking table :

It is widely applied on separating Gold, Tungsten, Tin, Manganese, Iron, Titanium, Zircon, Tantalum, Barium, Chrome, Lead, Zinc, Mercury, Copper, Aluminum ,and other rare metals and the noble metal ore, also applied on sorting coal.It can carry out ore concentration operation independently and also can operate in conjunction with jig, spiral separator, centrifugal separator and other equipment.

  Technical parameters of  shaking table :

Name		Unit	Coarse ore Deck	Fine sand Deck	Slime Deck
Deck Size	Length	mm	4450	4450	4450
	transmission end width	mm	1855	1855	1855
	Concentrate end width	mm	1546	1546	1546
Maximum Feeding Size		mm	2	0.5	0.15
Feeding Amount		t/d	30-60	10-20	15-25
Feeding Density		%	25-30	20-25	15-25
Stroke		mm	16-22	11-16	8-16
Frequency		f	45-48	18-53	50-57
Water added		t/d	80-150	30-60	10-17
Transverse slope of Deck		degree	2.5-4.5	1.5-3.5	1-2
Longitudinal slope of Deck		degree	1.4	0.92	------
Beneficiation Area		-----	7.6	7.6	7.6
Cross-section Shape of Deck		-----	rectangular	saw tooth	triangle
Motor Power		KW	1.1	1.1	1.1