- Model NO.: Hongke
- Brand: Hongke
- Power: Electric
- Use Life: More Than 10 Years
- Worker Traning: Offer
- Warranty: 3 Years
- Trademark: Hongke
- Origin: Henan China
- Certification: ISO
- Voltage: 220V-380V
- Install: Easy
- Spare Parts: Offer
- Work Hours: 24
- After Sale Service: by Service Center
- Specification: ISO
- HS Code: 84793000
1. Brief Introduction of Wood crusher
Wood crusher advantages: reasonable design, low loss, low noise, no pollution, easy operation.
As soon as launching on the market, this wood and straw crusher occupies a leading position in the wood flour machine market.
2. Application of Wood crusher
Machine can installed on the cart or farm vehicle;
3. Structure of Wood crusher
Wood Crusher is mainly composed of four parts such as principal machine, coupling, bottom frame and motor, etc,
in which the principal machine of crusher machine is composed of cutter head, upper and lower covers, feed inlet and outlet, etc.
4. Functions and Usage of Wood crusher
1. Use the wood and corn stalk crusher to crush wood into chip;
2. Use the chip dryer to take out the moisture of chip;
3. Use the Chip Forming Machine to press chip into stick;
4. Use the wood charcoal bake stove to bake the stick into charcoal;
5. Then use the wood and straw crusher again to break the charcoal into powder;
6. Use the powder molding machine to press the charcoal powder into all kinds of shape(you can customize many kinds of mould);
7. Use the packing machine to package the shaped charcoal.
(You can choose it base your raw material,final product and wanted capacity)
5. Technical Parameters of Wood crusher
|Cutter Head Dia.(mm)||450||600||650||750||850||950|
|Length of Knife (mm)||100||150||200||230||260||300|
|Feed Opening Size(mm)||180x200||200x200||200x250||250x300||300x400||400x500|
1. One Year (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost.
After one year, parts can be replaced on favorable payment basis.We can send our engineer to provide the installation and trial run in your place.
But the relevant cost shall be bear in your account (round trip air ticket, board and lodging).
2. Our professional service includes: Free training, Guidance Installation and Debugging.
3. If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.
2. Please Inform us the follow figures:
1). feeding material
2). Feeding material MAX. Size (mm)
3). Final mesh size (mm)
4). Capacity (t/h)
Upon we got your message we shall give you our favorable offer in short time.