Factory Price About Rotary Drum Dryer

• After-sales Service: Life Long Time
• Warranty: The Whole Using Life
• Movement Way: Agitation
• Heating Mode: Radioactive
• Material Status: Powder, Bulk
• Drying Medium: Slag, Clay, Cement Limestone and Others
• Model NO.: 0.6*8m
• Operation Pressure: Vacuum Dryer
• Drum Number: Single
• Type: Spray Type
• Specification(M): 0.6*8
• Capacity(T/H): 0.5-22
• Power(Kw): 4
• Weight(T): 5.1
• Delivery Detail: Supply The Detailed Info.
• Factory Visit: Welcome
• Installation: Our Engeers Guide
• Price: Negotiable
• Structure: Rotary Type Drier
• Operational Method: Continuous
• Appearance of Dried Sample: Bulk
• Type of Flow: Parallel Flow
• Type of Atomization: Rotary Atomization
• Sprayer: Air-Flowing Type
• Transport Package: as Client Required
• Specification: Reference as the Form
• Trademark: Hongke
• Origin: Henan, China
• HS Code: 84178030
• Production Capacity: 100 Sets/Month

Product Description

Description of Rotary drum dryer
rotary drum dryer, also known as drum dryer. It is widely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials. It consists of rotary body, lifting plate, gear, support equipment and seals and other components. With a resonable structure, well-made, high-yield, low energy consumption, easy operation and so on.
Brief introduction of rotary drum dryer/drying machine
The rotary dryer is a type of industrial dryer used for reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas.
The working principle of rotary drum dryer/drying machine:
The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls.
This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers are also available to improve the overall efficiency.
Applications of rotary drum dryer/drying machine:
Rotary dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine,etc. Rotary dryer can be widely used to dry various materials, and it is simple to be operated. 
Rotary Dryers have many applications but are most commonly seen in the mineral industry for drying sands, limestone, stones and soil, ores, fertilizers, wood chips, coal, iron sulphate, filter cakes, sewage sludge, etc.
Technical Parameters:

Model (mm)	Obliquity(%)	Rotation speed (r/min)	Feeding temperature (degree)	Power (kw)	Capacity(t/h)	Weight (t)
600x6000	3-5	3-8	<=700	3	0.5-1.5	2.9
800x8000	3-5	3-8	<=700	4	0.8-2.0	3.5
800x10000	3-5	3-8	<=700	4	0.8-2.5	4.5
1000x10000	3-5	3-8	<=700	5.5	1.0-3.5	5.6
1200x10000	3-5	3-8	<=700	7.5	1.8-5	14.5
1200x12000	3-5	3-8	<=700	11	2-6	14.8
1500x12000	3-5	2-6	<=800	15	3.5-9	17.8
1800x12000	3-5	2-6	<=800	18	5-12	25
2200x12000	3-5	1.5-6	<=800	18.5	6-15	33
2200x18000	3-5	1.5-6	<=800	22	10-18	53.8
2200x20000	3-5	1.5-6	<=800	30	12-20	56
2400x20000	3-5	1.5-5	<=800	37	18-30	60
3000x20000	3-5	1.5-5	<=800	55	25-35	78
3000x25000	3-5	1.5-5	<=800	75	32-40	104.9