Product Description
1.The Introduction Of Raymond Mill Machine
Raymond mill is suitable for making powder equipment for all kinds of mine, chemical industry, building material, metallurgy.
Raymond mill is mainly used for barite, calcite, potash feldspar, limestone, marble, glass and other Mohs hardness less than 7 and humidity. Below 6% of non-explosive mining, chemicals and building materials milling and processing industries more than 280 kinds of material. The product is more traditional, widely used mill.
Raymond Mill is also known as the Mill Hill stone.Is a new mine milling equipment, milling machine is mainly used in mining, building materials,chemical, metallurgical and other industries, limestone,calcite,barite,dolomite,potassium feldspar,marble, talc, gypsum, kaolin,swelling soil, phosphate rock, manganese ore, iron ore, glass, ceramic, activated carbon, carbon black, refractory, insulation materials, Chemical raw materials, and Mohshardness of not more than 7, humidity less than 6 percent of more than 300 kinds of non-inflammable and explosive materials for milling processing, product fineness can be adjusted between 30-325 mesh(The finest 600mesh)
Raymond Mill can mill quartz, feldspar, calcite, talc, barite, fluorite, rare-earth, marble, ceramic, bauxite, manganese ore, iron mine, copper, phosphate ore, etc,
The final size can be controlled from 0.044mm to 0.125mm, which equal with that from 100 mesh to 325 mesh though Pendulum crusher.
characteristics
2. STRUCTURAL CHARACTERISTICS OF RAYMOND MILL
1. The structure of Raymond mill is three-dimensional, it occupies a small area, and from block material to finished product, it is an independent production system.
2. The fineness of the finished product is uniform, and the screening rate is 99%, which is difficult for other milling equipment.
3. The main engine transmission device adopts closed gearbox and pulley, which has stable transmission and reliable operation.
4. The important components are made of selected steel, and the wear-resistant parts are made of high-performance wear-resistant materials.The equipment has high wear resistance and low failure rate.
5. The equipment adopts centralized control electrical system. The mill does not require human operation and is easy to maintain.
Working principle
3.Working principle
The material is crushed into small particles by the crusher and sent to the storage hopper by the bucket elevator.
Then the electromagnetic vibration feeder feeds the crushed material into the main machine for grinding.
Suitable for many fields
Building
Metallurgy
Chemical industry
Railway
Pave the road
Water conservancy
4.Working principle of raymond milling machine
Be processed materials into the Raymond Mill host the grinding chamber, due to the spindle rotates, centrifugal force, the roller swings out, pressed on the grinding ring.Between the blade to scoop up the materials sent to the grinding ring rolling mill rolls to achieve grinding, smash purpose, Material grinding, the powder with the blower cycle wind sorting through the analysis machine, fine through coarse material falls back to the grinding chamber to re-grinding, qualified powder with the air flow into the cyclone powder collector, through a powder discharge pipels finished.Airflow through the cyclone powder collector and then enter the blower to form a closed loop, so that the machine work properly and continuously.I wind through more than duct from the plane into the dust after purification.
structure
5.The Main Structure
- the whole plant of industrial Raymond mill is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system;
2. Compared with other milling plants, this energy saving raymond mill passing ratio achieves 99%, this is what other mill can not reach;
3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably;
4. Main parts of the whole plant are made from cast and steel of high quality. The techniques is so subtly that insures the durability of whole plant;
5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.
Installation Instructions
6.Raymond mill Maintenance and Repair
1. Prior to installation of the equipment, all the people who will be assigned to operate the equipment have to be technically trained to know the principle and rules of operation. Someone should be specially selected and put in charge of the operation.
2. To ensure normal operation of the equipment, a manual containing strict rules and procedures for its operation, maintenance and repair should be well prepared and followed. Tools, replacement parts for maintaining, repairing and lubricating oil and grease must be available for immediate use.
3. After a period of usage, the equipment should be checked, to replace worn-and-torn parts such as rollers, rings and shovels. Be sure to fasten connecting-bolts, nut collars to fix rollers properly. Be sure to lubricate the parts sufficiently.
4. Roller should be replaced after 500-hours use. To check and wash bearings, replace broken ones, then fill enough oil and grease (with oil-pump or grease-gun).
Product Parameters
7.Product Parameters
| Model |
Roller piece |
Roller size |
Max feeding size(mm) |
Final size(mesh) |
Capacity(t/h) |
Main frame power(kw) |
Weight(t) |
Overall DIMENSION (L*W*H)(m) |
| 3R1510 |
3 |
150*100 |
15 |
0.125-0.044 |
0.8-10 |
7.5 |
2 |
3.2*2.1*3.8 |
| 3R2115 |
3 |
210*150 |
15 |
0.125-0.044 |
1-12 |
15 |
3.3 |
3.5*3.3*4.5 |
| 3R2615 |
3 |
260*150 |
20 |
0.125-0.044 |
1.5-20 |
18.5 |
4 |
4.65*3.6*5.1 |
| 3R2715 |
3 |
270*150 |
20 |
0.125-0.044 |
2-28 |
22 |
4.2 |
4.7*3.6*5.1 |
| 3R3015 |
3 |
300*150 |
25 |
0.125-0.044 |
2-35 |
30 |
7 |
5.3*4.1*5.2 |
| 4R3016 |
4 |
300*160 |
25 |
0.125-0.044 |
3-36 |
30 |
7.5 |
5.4*4.1*5.2 |
| 4R3216 |
4 |
320*160 |
25 |
0.125-0.044 |
4-45 |
37 |
15.7 |
7.1*5.9*7.9 |
| 4R3220 |
4 |
320*200 |
25 |
0.125-0.044 |
4-55 |
45 |
16 |
9.9*5.8*1.058 |
| 5R4119 |
5 |
410*190 |
30 |
0.613-0.044 |
8-60 |
75 |
26.5 |
9.2*7.25*9.7 |
FAQ:
1. What is the raw material do you want to grind?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?
1.Are you a manufacturer or a trading company?
A: We are a professional manufacturer of rotary kiln equipment and related machinery
(Rotary kiln, granulator, crusher, grinder, dryer, cooler, feeder, conveyor belt), etc.
2.What should I do if I encounter some trouble while using it?
A: We will provide English manuals and videos to show you how to solve the problem, and if necessary, we will dispatch our engineers to your factory.
3. Do you provide installation services after ordering the machine?
A: For single machines, we provide guidance and operation videos for users.
For the production line, we provide professional construction drawings and arrange engineers to guide users in installing machines. Assist users in training skilled workers.
4.Can we visit your factory and see your equipment?
A: We really warmly welcome every customer to visit our factory, and we can take them to visit the machinery factory
1. We have comprehensive technical and business consulting services;
2. Propose the most suitable solution and equipment for our customers;
3. Free CAD design: If you can provide materials, target capabilities, and factory information, we can provide you with free CAD design.
After sales service:
1. Safe and fast payment methods;
2. Assist clients in equipment foundation construction;
3. Dispatch engineers to install and debug the equipment;
4. Provide training for frontline operators on site;
5. Regularly visit customers, solve production problems, and provide lifelong service
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification, so pls leave us an inquiry to know more details about price, packaging shipping and discount.
Now, please click the following contact to send us email for best offer and more details !
↓↓↓
Henan Hongke Heavy Machinery Co.,ltd
Tel&Fax:0086-371-68617124
Audited Supplier 
){kind=link}
){kind=link}