| After-sales Service: | Provided |
|---|---|
| Warranty: | 3 Years |
| Diameter: | 1.8m |
| Length: | 45m |
| Gradient: | 4 |
| Yield: | 1.9-2.4 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
lime kiln:
Product Introduction
The main equipments in Sand Production Line includes crusher, screening machine, belt conveyor, feeding machine, discharge machine, raw material storage warehouse, dustfall room, induced draft fan, main kiln body, coal injection system and control cabinet, etc. The speed of the feeder under the raw material stroge warehouse, kiln body and the quantity of coal arching are all of stepless speed regulating.
Active lime rotary kiln means calcination kiln(commonly known asrotary kiln), is a dynamic exercise patterns, building materials and equipment belonging to the class.Active lime is mainly used in building materials, steel mills, ferroalloy plants,power plants, power plants,acetylene plants,papermills and other desulfurization project.
Lime kiln technology advanced, structure simple, low preheater can effectively improve the preheating, the decomposition rate of limestone into the kiln after preheated up to 20-25%, effectively raising the rotary kiln production,reduce the heat dissipation. And direct the use of fine-grained limestone calcination 20-60mm.In addition to conventional production lines, also has high-end configuration six Tuitou preheater, preheater Tuitou eight,ten Tuitou preheater, twelve Tuitou preheater.
Rotary kiln is equipped with simple structure, a few wearing parts and high operation ratio which can ensure a reliable control during the production process.
1. Through technological innovation, our rotary calcinations kiln is designed with international leading wheel catch device, high precision plunger metering pump, high accuracy speed control valve and contact graphite block sealing device, etc.
2. In order to improve machinery automation, an industrial computer is used for showing the calcining condition, and a fluorescent screen is adopted for showing the simulated process flows. An infrared scanner is utilized for transmitting the calcining condition to the computer.
3. These new technologies provide our rotary calcination kiln with strong visual sense, convenient operation and reliable performance. They help stabilize thermal regulation and improve operation efficiency.
Slaked lime production line Features:
1. Advanced structure, low pressure loss vertical preheater can effectively improve the preheating effect, the preheated limestone into the kiln decomposition rate can reach 20-25%, and can directly use 10-15mm fine-grained limestone;
2. Reliable rotary kiln two-end combined scale sealing. Make the air leakage coefficient less than 10% use composite refractories to reduce radiant heat loss;
3. Filled, zoned ventilation circular or square vertical cooler, so that the lime temperature of the cooler is 800C + ambient temperature, which is convenient for transportation and storage, and can preheat the secondary air into the kiln to more than 7000C, reducing moving parts and special materials.
4. High quality of raw materials and good quality of lime; The fuel has a high calorific value and low quantity consumption.
5. The limestone particle size is proportional to the calcination time; The activity of quicklime is inversely proportional to the calcination time and calcination temperature.
Limestone crushing process and equipment:
In order to make the grain size of limestone meet the basic requirements of lime rotary kiln, it is crushed. The crushing equipment is divided into primary and secondary crushing.
The first-level crushing equipment includes jaw crusher, gyratory crusher and hammer crusher, the former two are suitable for limestone with high silicon content and high hardness, and hammer crushing is suitable for general limestone.
The secondary crushing equipment includes impact crusher, cone crusher and hammer crusher. They mainly crush and shape the coarsely broken limestone.
Limestone calcination equipment:
Production of calcium hydroxide equipment|The production of calcium hydroxide process equipment lime rotary kiln calcination has gone through four steps: feeding part, calcination, ash output, fuel combustion. Lime calcination is a series of physical changes and chemical reaction process, in the lime rotary kiln fuel combustion heat transfer methods both convective heat transfer and radiation heat transfer two main heat transfer methods.
Production of calcium hydroxide equipment|Production of calcium hydroxide process equipment calcined lime principle is that limestone passes through three belts in the kiln. In the pre-tropical material with the help of flue gas temperature, evaporate water and volatilize; In the calcined zone, limestone is calcined with the help of the heat released by fuel combustion, and the limestone is decomposed to form lime; In the cooling zone, lime is cooled by heat exchange with cold air entering the kiln. Limestone generally begins to decompose CO2 at 600, and dolomite begins to decompose CO2 at 500.
Production of calcium hydroxide equipment|The production of calcium hydroxide process equipment mainly includes: raw material storage silo, raw material crusher, conveyor, one stage digester, second stage digester, third stage digester (optional), fully enclosed pulse dust collector, powder separator, finished product storage silo, automatic quantitative packaging machine (optional), intelligent control cabinet and other equipment composed of fully enclosed automatic calcium hydroxide production equipment. The whole set of equipment adopts the closed circulation winnowing powder method to make the fineness of the finished calcium hydroxide range from 100 mesh to 600 mesh, and the product can be divided into multiple stages. Production of calcium hydroxide equipment|production of calcium hydroxide process equipment to produce finished products from equipment specifications: 2-3 tons/hour, 5-6 tons/hour, 8-10 tons/hour, 15 tons/hour, 20 tons/hour and other product specifications. Product quality is fully in line with industry standards and requirements. The purity of the products produced by the equipment is greater than or equal to 97%, and the water content is less than or equal to 1%. It is an ideal product for environmental protection in the fields of coatings, power plant desulfurization, water purification and water quality pH adjustment.
The working process of the lime rotary kiln is: after treatment, the qualified limestone is stored in the silo, lifted by the hoist and transported to the top silo of the preheater. The top silo of the preheater is controlled by two level gauges, and then the limestone is evenly distributed to each chamber of the preheater through the lower feeding tube. The limestone is heated to about 900 °C by the flue gas of the kiln at 1150 °C in the preheater, and about 30% is decomposed, and pushed into the lime rotary kiln by hydraulic pusher, and the limestone is sintered and decomposed into CaO and CO2 in the rotary kiln. The limestone generated after decomposition enters the cooler, where it is cooled by the cold air that is blown into the cooler to 100°C and discharged. The 600°C hot air through heat exchange enters the kiln and gas is mixed and burned. The exhaust gas enters the bag filter through the induced draft fan into the cold air, and then enters the chimney through the exhaust fan. The lime out of the cooler is fed into the lime finished product warehouse by vibrating feeder, chain bucket conveyor, bucket elevator and tape conveyor. Whether to carry out screening and other processes according to customer requirements.
Production of calcium hydroxide equipment|The fuel used for calcining lime in the rotary kiln of calcium hydroxide process equipment can be divided into 1. Solid fuels, such as coal, coke, etc. according to its state; 2. Liquid fuels, such as heavy oil, kerosene, diesel, etc.; 3. Gas fuels, such as liquefied petroleum gas, furnace gas, natural gas, etc.
1. With a certain slope to the level, the whole kiln body is supported by rollers and fitted with thrust rollers to control up and down movement of the kiln body.
2. Besides main driving unit for driving system, it is also fitted with the auxiliary driving unit so as to ensure the kiln body still can rotating when the main motor is powered off and prevent it from deforming.
Our factory has rugged structure with smooth operation and high quality outlet products.
We provide our customers with advanced, efficient vertical heating device as well as cyclone heating device.
Specification and technical parameters:
|
Specifications Model |
The size of the kiln |
Yield |
Speed |
Electrical power (kw) |
Weight |
Remarks |
||
|
Diameter |
Length |
Gradient |
||||||
|
φ1.4×33 |
1.4 |
33 |
3 |
0.9-1.3 |
0.39-3.96 |
18.5 |
47.5 |
---- |
|
φ1.6×36 |
1.6 |
36 |
4 |
1.2-1.9 |
0.26-2.63 |
22 |
52 |
---- |
|
φ1.8×45 |
1.8 |
45 |
4 |
1.9-2.4 |
0.16-1.62 |
30 |
78.2 |
---- |
|
φ1.9×39 |
1.9 |
39 |
4 |
1.65-3 |
0.29-2.93 |
30 |
77.59 |
---- |
|
φ2.0×40 |
2 |
40 |
3 |
2.5-4 |
0.23-2.26 |
37 |
119.1 |
---- |
|
φ2.2×45 |
2.2 |
45 |
3.5 |
3.4-5.4 |
0.21-2.44 |
45 |
128.3 |
---- |
|
φ2.5×40 |
2.5 |
40 |
3.5 |
9.0-10.5 |
0.44-2.44 |
55 |
149.61 |
---- |
|
φ2.5×50 |
2.5 |
50 |
3 |
6.25-7.4 |
0.62-1.86 |
55 |
187.37 |
---- |
|
φ2.5×54 |
2.5 |
54 |
3.5 |
6.9-8.5 |
0.48-1.45 |
55 |
196.29 |
---- |
|
φ2.7×42 |
2.7 |
42 |
3.5 |
10.0-11.0 |
0.10-1.52 |
55 |
198.5 |
---- |
|
φ2.8×44 |
2.8 |
44 |
3.5 |
12.5-13.5 |
0.437-2.18 |
55 |
201.58 |
Suspension preheater kiln |
|
φ3.0×45 |
3 |
45 |
3.5 |
12.8-14.5 |
0.5-2.47 |
75 |
210.94 |
---- |
|
φ3.0×48 |
3 |
48 |
3.5 |
25.6-29.3 |
0.6-3.48 |
100 |
237 |
The kiln, kiln |
|
φ3.0×60 |
3 |
60 |
3.5 |
12.3-14.1 |
0.3-2 |
100 |
310 |
---- |
|
φ3.2×50 |
3.2 |
50 |
4 |
40.5-42 |
0.6-3 |
125 |
278 |
The kiln, kiln |
Warranty
1. Three-five Years (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis.We can send our engineer to provide the installation and trial run in your place. But the relevant cost shall be bear in your account (round trip air ticket, board and lodging).
2. Our professional service includes: Free training, Guidance Installation and Debugging.
3. If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.
↓↓
FAQ
1. What is the raw material do you want to grind?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?
1.Are you a manufacturer or a trading company?
A: We are a professional manufacturer of rotary kiln equipment and related machinery
(Rotary kiln, granulator, crusher, grinder, dryer, cooler, feeder, conveyor belt), etc.
2.What should I do if I encounter some trouble while using it?
A: We will provide English manuals and videos to show you how to solve the problem, and if necessary, we will dispatch our engineers to your factory.
3. Do you provide installation services after ordering the machine?
A: For single machines, we provide guidance and operation videos for users.
For the production line, we provide professional construction drawings and arrange engineers to guide users in installing machines. Assist users in training skilled workers.
4.Can we visit your factory and see your equipment?
A: We really warmly welcome every customer to visit our factory, and we can take them to visit the machinery factory
1. We have comprehensive technical and business consulting services;
2. Propose the most suitable solution and equipment for our customers;
3. Free CAD design: If you can provide materials, target capabilities, and factory information, we can provide you with free CAD design.
After sales service:
1. Safe and fast payment methods;
2. Assist clients in equipment foundation construction;
3. Dispatch engineers to install and debug the equipment;
4. Provide training for frontline operators on site;
5. Regularly visit customers, solve production problems, and provide lifelong service
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification, so pls leave us an inquiry to know more details about price, packaging shipping and discount.
Now, please click the following contact to send us email for best offer and more details !
↓↓↓
Henan Hongke Heavy Machinery Co.,ltd
Tel&Fax:0086-371-68617124
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}