Product Introduction
Brief introduction of grate ball mill
Grate ball mill is similar with wet grid ball mill except that ore discharging end is installed with ore discharging grid plate. End housing with hollow journal at ore discharging end is equipped with bearing inner sleeve and ore discharging grid. Ore discharging grid is composed of center lining plate, grid lining plate and dustpan-shaped lining plate. The inner wall of end housing is casted with eight radial ribs, and the end cap is divided into eight fan-shaped chambers, which is fixed with dustpan-shaped lining plate in each sector chamber and fix it in housing cap by using screws, and then the grid plate is mounted on each fan chamber formed by dustpan-shaped lining plate.
Product Application
Main application of grate ball mill
Grate Ball mill is widely used in production lines for powders such as cement, silicates, refractory material, fertilizer, glass ceramics, etc. as well as for ore dressing of both ferrous non-ferrous metals.It is used for fine grinding of feldspar, quartz, clay, ore and other raw materials
structure
INTERNAL STRUCTURE OF CERAMIC BALL MILL
Although ceramic liner ball mills and ordinary ball mills have similar shapes and working principles, ceramic liner ball mills have unique advantages in many industries, which are also not available in ordinary ball mills. For example, in the mineral processing industry, many of the grinding processes of raw materials cannot have the participation of iron metal, otherwise the quality and value of the finished product will be greatly affected. At this time, it is necessary to choose a mill with ceramic liner. In addition, the ceramic liner is very wear-resistant, the service life is also greatly extended, for the same material, the service life of the ceramic liner ball mill liner can be extended at least several times.
Main Features
Features of Grate Ball Mill
1. High-efficiency
2. Easy to maintain
3. Low consumption, energy saving
4. Reasonable design
Our Advantages
Advantages of grate ball mill
1. As the ball mill transmission adopts rolling bearing instead of sliding bearings, friction is greatly reduced with easy start-up and significant saving energy;
2. Its discharging end adopts cone design, which not only increased the volume, but also forcing grading of ball in cone side. The closer exit, the smaller ball diameter. It increased function of repeated grinding, and further improve fineness of the material;
3. It adopts grooved ring-type lining plate, increased contact surface of ball ore, strengthen grinding effect, has hoisting capacity to ore and reduced power.
4. It adopts whole rack, convenient for civil construction and equipment installation.
Working principle
Working principle of grate ball mill
The hole in grid lining plate is arranged obliquely, the width of the hole is gradually expanded toward the end of ore discharging to prevent pulp backflow and coarse grain blocking. Pulp flows into fan-shaped through pore of grid lining plate in the lower part of ore discharging, and then goes to upper part with barrel and discharges it along with pore passage. Hollow journal is set with wear-resistant inner sleeve, and one end is made into tubaeform blade so as to guide pulp to flow out mill along blade. This pulp mill is discharged through ore discharging devices of grid plate.
The motor on the ceramic ball mill drives the cylinder rotation through the deceleration device, and then the crushed ore and grinding ball in the cylinder are brought to a certain height by friction and centrifugal force when the cylinder rotates, and after the liner is brought to a certain height due to gravity, it will be thrown and falling, and the ore will be gradually crushed under the action of impact and grinding. The crushed stone is discharged through the discharge part.
After the discharged material is classified into a qualified product in the spiral classifier, the coarse sand is returned to the ball mill through the combined feeder to continue grinding. The feeder feeds continuously and evenly, and the ore enters the ceramic ball mill continuously and evenly through the combined feeder, and the ground material is continuously discharged from the ceramic ball mill. Ceramic ball mill is a grinding equipment that can work continuously 24 hours a day.
Technical Data
Technical Data:
| Model |
Shell rotation speed
(r/min) |
Ball load
(t) |
Feeding size
(mm) |
Discharging size
(mm) |
Capacity
(t/h) |
Motor power
(kw) |
Total weight
(t) |
| Ф900×1800 |
36-38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
5.5 |
| Ф900×3000 |
36 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
6.7 |
| Ф1200×2400 |
36 |
3 |
≤25 |
0.075-0.6 |
1.5-4.8 |
30 |
12 |
| Ф1200×3000 |
36 |
3.5 |
≤25 |
0.074-0.4 |
1.6-5 |
37 |
12.8 |
| Ф1200×4500 |
32.4 |
5 |
≤25 |
0.074-0.4 |
1.6-5.8 |
55 |
13.8 |
| Ф1500×3000 |
29.7 |
7.5 |
≤25 |
0.074-0.4 |
2-5 |
75 |
16.8 |
| Ф1500×4500 |
27 |
11 |
≤25 |
0.074-0.4 |
3-6 |
110 |
21 |
| Ф1500×5700 |
28 |
12 |
≤25 |
0.074-0.4 |
3.5-6 |
130 |
25.8 |
| Ф1830×3000 |
25.4 |
11 |
≤25 |
0.074-0.4 |
4-10 |
130 |
29 |
| Ф1830×4500 |
25.4 |
15 |
≤25 |
0.074-0.4 |
4.5-12 |
155 |
35.5 |
| Ф1830×6400 |
24.1 |
21 |
≤25 |
0.074-0.4 |
6.5-15 |
210 |
43 |
| Ф1830×7000 |
24.1 |
23 |
≤25 |
0.074-0.4 |
7.5-17 |
245 |
43.8 |
| Ф2100×3000 |
23.7 |
15 |
≤25 |
0.074-0.4 |
6.5-36 |
155 |
34.8 |
| Ф2100×4500 |
23.7 |
24 |
≤25 |
0.074-0.4 |
8-43 |
245 |
42 |
| Ф2100×7000 |
23.7 |
26 |
≤25 |
0.074-0.4 |
8-48 |
280 |
56.6 |
| Ф2200×4500 |
21.5 |
27 |
≤25 |
0.074-0.4 |
9-45 |
280 |
51.8 |
FAQ
FAQ:
1. What is the raw material do you want to grind?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?
1.Are you a manufacturer or a trading company?
A: We are a professional manufacturer of rotary kiln equipment and related machinery
(Rotary kiln, granulator, crusher, grinder, dryer, cooler, feeder, conveyor belt), etc.
2.What should I do if I encounter some trouble while using it?
A: We will provide English manuals and videos to show you how to solve the problem, and if necessary, we will dispatch our engineers to your factory.
3. Do you provide installation services after ordering the machine?
A: For single machines, we provide guidance and operation videos for users.
For the production line, we provide professional construction drawings and arrange engineers to guide users in installing machines. Assist users in training skilled workers.
4.Can we visit your factory and see your equipment?
A: We really warmly welcome every customer to visit our factory, and we can take them to visit the machinery factory
1. We have comprehensive technical and business consulting services;
2. Propose the most suitable solution and equipment for our customers;
3. Free CAD design: If you can provide materials, target capabilities, and factory information, we can provide you with free CAD design.
After sales service:
1. Safe and fast payment methods;
2. Assist clients in equipment foundation construction;
3. Dispatch engineers to install and debug the equipment;
4. Provide training for frontline operators on site;
5. Regularly visit customers, solve production problems, and provide lifelong service
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification, so pls leave us an inquiry to know more details about price, packaging shipping and discount.
Now, please click the following contact to send us email for best offer and more details !
↓↓↓
Henan Hongke Heavy Machinery Co.,ltd
Tel&Fax:0086-371-68617124
Audited Supplier 
){kind=link}
){kind=link}