2016 Hot Sale Customized Elevator

• Application: Workshop Crane, Shipboard Crane, Warehouse Crane, Building Crane
• Lift Mechanism: Lift Chain
• Carrying Capacity: Middle-Level
• Moves: Stationary
• Driven Type: AC
• Running Mode: Stationary
• Model NO.: 160 type
• Feature: Insulating
• Certification: CE, ISO 9001
• Model No.: 160type
• Warranty: 2 Years
• Customized: Customized
• Color: as Clients Required
• Material: Carbon Steel
• Transport Material: Powder, Granule and Small Piece
• Main Motor: According to The Actual Length
• Transport Way: Vertical Transportation
• Transport Package: as Clients Required
• Specification: Reference as the Form
• Trademark: Hongke
• Origin: Zhengzhou, Henan
• HS Code: 84283300
• Production Capacity: 300 Sets/Month

Product Description

Production Description
Bucket elevator is used to transfer the material from ground level to certain height. It consists of a cotton or rubber belt running on one drive pulley at the top and the other one is driven pulley, which is at the bottom insides a fabricated casing. Belt is filted with buckets at some specific intervals. Buckets lift the material from ground level to a higher level and buckets are emptied while moving around top pulley by centrifugal action. 

Application Scope
TB series bucket elevator is widely used in power plant, metallurgy, cement, chemical, light industry and so on. It is used for lifting  coal cinder ,piece coal, crushed stone, mineral stone, egg stone, dry and bulk and fluidity power, granular and block material  and so on.The material density is not more than 2 t/m3, the site temperature is not more than 2500C.

Operating principle

When the driving device start working , it drives the puley to make the chains with buckets to do the circular movement  from the below of the tail  to the top of the head  The head section has  outlet and the tail section has inlet.
The bucket is filled with material and run to the head section, then the material is thrown out from the outlet under the action of centrifugal force according to the parabolic design.With the running, the empty bucket is back to the below tail section and be filled material from the inlet again,then be lifted up to do parabolic discharge movement . So this cycle  finish the vertical transport of materials.
Component of bucket elevator. It consists of head section with driving pulley, elevator boot (down section) with take-up pulley, elevator casing, driving device and back stop ,braking device. there is a inspection hole on elevator casing, to observe all operation. Driving device is equipped with YZ reducer and ZQ reducer. YZ axis reducer is directly coupled with pulley shaft. this design can omit driving platform with compact structure, light weight. Also, fixed security protector on bucket elevator: belt speed detector, belt alignment device, backstop, etc. to ensure safty operation.



Features
1.It need small installation space and can lift more materials. it can convey the power, for example the calcined soda, salmiac, coal powder etc.
2.The transmission capacity is large. Lift the capacity up to 480 m3/h.
 

Model	TH160		TH200		TH250			TH315		TH400		TH630		TH800		TH1000
Hopper type	Zh	Sh	Zh	Sh	Zh		Sh	Zh	Sh	Zh	Sh	Zh	Sh	Zh	Sh	Zh	Sh
Delivery value(m3\h)	8	12	13	22	16		28	21	36	36	56	68	110	87	141	141	200
Hopper width(mm)	160		200		250			315		400		630		800		1000
Hopper capacity(L)	1.2	1.9	2.1	3.2	3.0	4.6		3.75	6	5.9	9.5	14.6	23.6	23.3	37.5	37.6	58
Hopper distance(mm)	320		400		500			500		600		688		920		920
Specification of chain	φ12×38		φ12×38		φ14×50			φ18×64		φ18×64		φ22×86		φ26×92		φ26×92
Nodal diameter of sproket(mm)	400		500		600			630		710		900		1000		1250
Hopper speed(m/s)	1.25		1.25		1.4			1.4		1.4		1.5		1.6		1.61
Max granularity(mm)	18		25		32			45		55		75		85		100