4R3015 Mineral Raymond Mill Dolomite Ore Stone Raymond Mill Barite Exporter
1.Product Description of Ore Stone Raymond Mill
|
Product Name
|
Raymond mill for gypsum |
|
Suitable for
|
Gypsum, limestone, cement, bauxite, Kaolin, Iron Ore , ceramic etc. |
|
Color
|
Customizable
|
Ore stone raymond mill is used in grinding the non-flammable and non explosive stuff which has the mohs hardness below 9.3,humidity less than 6%:
such as gypsum,talc,Calcite,limestone, marble,feldspar,barite,dolomite,granite,kaolin,bentonite,bauxite,iron ore etc.the final
products could be 60-325 mesh.some materials could get 1000 mesh.
2. Working Principle of Ore Stone Raymond Mill
Firstly, raw material is crushed by jaw crusher to the required size, which is lifted up to the hopper.
Secondly, the raw material goes into the grinding chamber of raymond mill machine through the electro-magnetic vibrating feeder at an even rate.
Thirdly, the raw material lifted by the shovel is ground into powderbetween the ring and roller. Fourthly, the powder isblown up to the cyclone collector through the classifier, which will be collected through the discharging valve. The unneeded powder, which cannot go the classifier, will be reground into the needed powder.
3. Features and Factory Pictures of Ore Stone Raymond Mill
1.The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw
material to grinding and packing is an independent production system.
2. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach.
3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.
4. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant.
5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.
4.Size Information of Ore Stone Raymond Mill
| Type |
Roll
Grinding
Number |
Maximum
Feed
Size
(mm) |
Output
Size
(mm) |
Output of
8 hours |
Motor
Power
(kw) |
Blower
Power
(kw) |
Analysis
Machine
Power(kw) |
Overall
Dimension
(mm) |
| 3R1510 |
3 |
10 |
80-325 |
0.3-1.2 |
7.5 |
5.5 |
1.1 |
3200*2100*4500 |
| 3R2115 |
3 |
20 |
80-325 |
0.4-1.6 |
15 |
11 |
>2.2 |
4100*3300*4500 |
| 3R2615 |
3 |
20 |
80-325 |
0.5-2.7 |
18.5 |
15 |
2.2 |
4300*3500*5100 |
| 3R2715 |
3 |
20 |
80-325 |
0.7-3 |
22 |
18.5 |
2.2 |
5300*4100*5200 |
| 4R3016 |
4 |
20 |
80-325 |
0.8-5 |
30 |
30 |
2.2 |
5300*4100*5200 |
| 4R3015 |
4 |
25 |
80-325 |
1.0-4 |
30 |
22 |
2.2 |
5500*4300*5400 |
| 4R3216 |
4 |
25 |
80-325 |
1.0-8 |
45 |
30 |
5.5 |
7100*5900*7900 |
| 4R3220 |
4 |
28 |
80-400 |
1-10 |
45 |
37 |
5.5 |
8000*6000*9500 |
| 5R4119 |
5 |
30 |
80-400 |
5-10 |
75 |
75 |
7.5 |
9200*7250*9700 |
| 6R4427 |
6 |
35 |
80-400 |
9-15 |
132 |
132 |
11 |
12550*5700*8355 |
5. Working Sites of Roller Mill
6.Company Introduction
Henan Hongke Heavy Machinery Co., Ltd. is located in Henan Province which is the cultural base of the central area of China. We are a mining machinery manufacturing enterprise that integrates scientific research, production and marketing.
We are a high-tech enterprise that specializes in the research and production of rotary kilns, dryers, crushers and so on, such as new type of lime rotary kiln, ceramsite kiln, zinc oxide rotary kiln, sludge rotary kiln, chemical rotary kiln, metallurgical rotary kiln, Raymond mill, ultra-fine mill, large and medium dryer, ball mill, sand mill,stone production line, mineral processing equipment and so on.
From the design, production, installation and debugging, we provide you the entire tracking service.We adhere to the aim of high quality to survive, good credibility to make development, and sincerely look forward to cooperating with you!
7.FAQ
1. What is the minium order quantity?
One set.
2.How long is the warranty period?
One year. Wearing parts are excluded.
3. What is the after-service of your company?
We can provide the customers foudation drawing, installation service, work training as well as other service according to the
customer's requirements.
4.How long is the delivery time?
About 15 days after we receive the payment.
5. What are the payment terms?
T/T, L/C are the best, it can be adjustable according to different situations.--------------------------------------------------------------------------------------
Kindly Note:
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.
2. Please Inform us the follow figures:
1). What is the raw material?
2). What is initial size and final size after griding?
3). Capacity ( t/h)
Upon we got your message we shall give you our favorable offer in short time.
Audited Supplier 
){kind=link}