Product Description
1.Jaw Crusher Introduction:
Jaw crusher is currently the world's most widely used, mainly for medium-grained variety of ores and bulk materials broken, the highest compressive strength of the material to be broken as 320 MPa.
Our ability to design and manufacture medium-sized jaw crusher in the domestic leading level, the research and production of medium and large jaw crusher with crushing ratio, even granularity, simple structure, reliable operation ,easy maintenance, operating costs low, can be widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industries.
PE-series of jaw crusher is widely used at home and aboard, for primary crushing of hard rocks and block materials. The large and medium-size crushers are the key products of our company and stand in the front of the industry in the aspect of design and production.
Jaw crusher is currently the world's most widely used, mainly for medium-grained variety of ores and bulk materials broken, the highest compressive strength of the material to be broken as 320 MPa.
Our ability to design and manufacture medium-sized jaw crusher in the domestic leading level, the research and production of medium and large jaw crusher with crushing ratio, even granularity, simple structure, reliable operation ,easy maintenance, operating costs low, can be widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industries.
The jaw crusher, also known as the jaw crusher, is mainly used for medium particle size crushing of various ores and bulk materials. It is widely used in industries such as mining, smelting, building materials, highways, railways, water conservancy, and chemical engineering. The high compressive strength of the crushed material can reach up to 320MPa. The performance characteristics are high crushing ratio, uniform product particle size, simple structure, reliable performance, easy maintenance, and low operating costs.
Product Application
Application of Jaw Crusher:
Jaw Crusher is widely used in mineral, quarry, building materials, road, railway, water conservancy and hydropower. The angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the effection of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Main Features
2.Jaw Crusher Features:
Jaw Crusher has features like simple structure, large crushing ratio, high capacity, even particles, convenient maintenance, low production cost and so on.
1. The crushing chamber is deep and has no dead zone, improving the feeding capacity and output.
2. Its crushing ratio is large and the product particle size is uniform.
3. The gasket type discharge port adjustment device is reliable and convenient, with a large adjustment range, increasing the flexibility of the equipment.
4. The lubrication system is safe and reliable, with convenient component replacement and simple equipment maintenance.
5. Simple structure, reliable operation, and low operating costs.
6. Equipment energy-saving: Single machine energy-saving by 15% to 30%, system energy-saving by more than twice.
7. The adjustment range of the discharge port is large, which can meet the requirements of different users.
8. Low noise and less dust.
Working principle
3.Jaw Crusher Working Principle
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft.
The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
The movable jaw is suspended on the spindle and can swing left and right. When the eccentric shaft rotates, the connecting rod moves up and down, driving the two thrust plates to also move back and forth, thereby pushing the moving jaw to move left and right, achieving crushing and unloading. This type of crusher adopts a crank double link mechanism. Although the moving jaw is subjected to a large crushing reaction force, its eccentric shaft and connecting rod are not subjected to much force. Therefore, in industry, large and medium-sized machines are often made to crush hard materials. In addition, when this type of crusher works, the motion trajectory of each point on the moving jaw is an arc centered on the center axis, and the arc radius is equal to the distance from the point to the axis. The upper end arc is small, while the lower end arc is large, resulting in low crushing efficiency. Its crushing ratio is generally 3-6. Due to the simple motion trajectory, it is called a simple swinging jaw crusher.
Technical Data
Production Parameter
| Type |
Maximum Feed
(mm) |
Adjusting Range
(mm) |
Production Capacity(t/h) |
Spindle Speed
(r/min) |
Motor Power
(kw) |
Dimensions
(L*W*H)
(mm) |
| PE150*250 |
125 |
10-40 |
1-5 |
285 |
5.5 |
8758*758*850 |
| PE250*400 |
210 |
20-80 |
5-20 |
310 |
15 |
1108*1142*1392 |
| PE400*600 |
340 |
40-100 |
16-65 |
275 |
30 |
1700*1732*1653 |
| PE500*750 |
425 |
50-100 |
45-100 |
275 |
55 |
2050*1860*2145 |
| PE600*900 |
500 |
65-160 |
50-120 |
250 |
55-75 |
2792*2168*2250 |
| PE750*1060 |
630 |
80-140 |
52-180 |
250 |
110 |
2660*2430*2800 |
| PE900*1200 |
750 |
95-165 |
140-260 |
200 |
132 |
3380*2870*3330 |
| PE1000*1200 |
850 |
150-265 |
315-340 |
200 |
132 |
3480*2876*3330 |
| PE1200*1500 |
1020 |
150-300 |
400-800 |
180 |
200 |
4200*3300*3500 |
FAQ
FAQ:
1. What is the raw material do you want to grind?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?
1.Are you a manufacturer or a trading company?
A: We are a professional manufacturer of rotary kiln equipment and related machinery
(Rotary kiln, granulator, crusher, grinder, dryer, cooler, feeder, conveyor belt), etc.
2.What should I do if I encounter some trouble while using it?
A: We will provide English manuals and videos to show you how to solve the problem, and if necessary, we will dispatch our engineers to your factory.
3. Do you provide installation services after ordering the machine?
A: For single machines, we provide guidance and operation videos for users.
For the production line, we provide professional construction drawings and arrange engineers to guide users in installing machines. Assist users in training skilled workers.
4.Can we visit your factory and see your equipment?
A: We really warmly welcome every customer to visit our factory, and we can take them to visit the machinery factory
1. We have comprehensive technical and business consulting services;
2. Propose the most suitable solution and equipment for our customers;
3. Free CAD design: If you can provide materials, target capabilities, and factory information, we can provide you with free CAD design.
After sales service:
1. Safe and fast payment methods;
2. Assist clients in equipment foundation construction;
3. Dispatch engineers to install and debug the equipment;
4. Provide training for frontline operators on site;
5. Regularly visit customers, solve production problems, and provide lifelong service
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification, so pls leave us an inquiry to know more details about price, packaging shipping and discount.
Now, please click the following contact to send us email for best offer and more details !
↓↓↓
Henan Hongke Heavy Machinery Co.,ltd
Tel&Fax:0086-371-68617124
Audited Supplier 
){kind=link}