| Customization: | Available |
|---|---|
| Type: | Shaking Table |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Construction of shaking table:
Head Motion The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.
Decks The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50°C.
Feed and Water Box A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.
Base A choice of ordinary type, groove steel support or big channel steel support is available.
Application of shaking table :
It is widely applied on separating Gold, Tungsten, Tin, Manganese, Iron, Titanium, Zircon, Tantalum, Barium, Chrome, Lead, Zinc, Mercury, Copper, Aluminum ,and other rare metals and the noble metal ore, also applied on sorting coal.It can carry out ore concentration operation independently and also can operate in conjunction with jig, spiral separator, centrifugal separator and other equipment.
Technical parameters of shaking table :
|
Name |
Unit |
Coarse ore Deck |
Fine sand Deck |
Slime Deck |
|
|
Deck Size |
Length |
mm |
4450 |
4450 |
4450 |
|
transmission end width |
mm |
1855 |
1855 |
1855 |
|
|
Concentrate end width |
mm |
1546 |
1546 |
1546 |
|
|
Maximum Feeding Size |
mm |
2 |
0.5 |
0.15 |
|
|
Feeding Amount |
t/d |
30-60 |
10-20 |
15-25 |
|
|
Feeding Density |
% |
25-30 |
20-25 |
15-25 |
|
|
Stroke |
mm |
16-22 |
11-16 |
8-16 |
|
|
Frequency |
f |
45-48 |
18-53 |
50-57 |
|
|
Water added |
t/d |
80-150 |
30-60 |
10-17 |
|
|
Transverse slope of Deck |
degree |
2.5-4.5 |
1.5-3.5 |
1-2 |
|
|
Longitudinal slope of Deck |
degree |
1.4 |
0.92 |
------ |
|
|
Beneficiation Area |
----- |
7.6 |
7.6 |
7.6 |
|
|
Cross-section Shape of Deck |
----- |
rectangular |
saw tooth |
triangle |
|
|
Motor Power |
KW |
1.1 |
1.1 |
1.1 |
|
){kind=link}