0.5-5 Tph Copper Ash Separator

• After-sales Service: Life Long Time
• Warranty: 3 Years
• Type: Separating Plant
• Object: Detergent Powder
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Model NO.: 3R, 4R, 5R
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Distillation Equipment Type: Molecular Distillation Equipment
• Extraction Tower Type: Vibration Plate Tower
• Pressure: High Pressure
• Condition: New
• Roller Piece: 3
• Roller Size: 1.5m*1.0m
• Max Feeding Size: 5-10mm
• Final Size: 80-325(Mesh)
• Capacity: 0.3-1.2(T/H)
• Main Frame Power: 7.5kw
• Fan Power: 5.5kw
• Classifier Power: 1.1kw
• Overall Dimension(L*W*H): 3.2m*2.1m*4.5m
• Transport Package: as Clients Required
• Specification: Reference as the Form
• Trademark: Hongke
• Origin: Zhengzhou, Henan
• HS Code: 84742090
• Production Capacity: Reference as The Form

Product Description

                                       Capacity 0.3-5 tph  Copper ash seperator
1.The application scope of  Copper ash seperator

Copper ash seperator is mainly used in hot-dip galvanizing plant and electrolytic zinc plant in the production process of a by-product (zinc ash), as well as electrolytic aluminum factory, profile factory, aluminum ash extracted from the furnace by die-casting enterprises has high economic value, but it must be ground and separated from some impurities before it can be used.
2. Factory Pictures of Copper ash seperator
3. workng Principle of  Copper ash seperator

The Copper ash seperator consists of three parts: crushing, separating and removing dust.

When the copper ash enters the separator, it is subjected to mechanical force.

The metal in the separator is deformed but the weight will not change, and it is discharged at the bottom of the machine.Impurity and copper are crushed into very fine powder by blower.

The fine powder is collected in the separator, and the gas is discharged into the dust collector. After the filter of the dust collector, the clean gas is discharged into the atmosphere.

The collected metal copper can be melted into zinc ingots, and fine powder can be directly sold or processed downstream products.

4. Delivery pictures of  Copper ash seperator

5.Performance Characistics of  Copper ash seperator

(1) Once separation, metal and residual ash can be separated without screening equipment.

(2) The metal recovery rate of the equipment is about 90%.

(3) The production of the equipment from 400 kg to 2500 kg per hour output varies according to the type of equipment, one product, no repeated grinding.

(4) The production procedure is simple, the equipment only adds the raw material into the main engine, after grinding, the metal particles and residual ash can be separated out, saving time and time, the production process is simple and easy to operate, and two workers can complete the operation.

(5) Device ring In the process of the separator, the material is in the state of negative pressure, and there is no dust overflow under the action of the dust collector.

6. Technical Parameters of Copper ash seperator

Specification		Roller piece	Roller size	Max feeding size (mm)	Final size (mesh)	Capacity (t/h)	Main frame power (kw)	Fan power (kw)	Classifier power (kw)	Overall Dimension (L*W*H)(m)
1 Type	3		150*100	5-10	80-325	0.3-1.2	7.5	5.5	1.1	3.2*2.1*4.5
2 Type	3		210*150	15-20	80-325	0.4-1.6	15	11	2.2	4.1*3.3*4.5
3 Type	3		260*150	15-20	80-325	1.5-2.7	18.5	15	2.2	4.3*3.5*5.1
4 Type	3		270*150	15-20	80-325	0.7-3	22	18.5	2.2	5.3*4.1*5.2
5 Type		4	300*150	15-20	80-325	0.8-5	30	22	2.2	5.3*4.1*5.2