400tpd/500tpd Zinc Ore Rotary Kiln Plant ZnO Rotary Kiln Manufacturer

Product Description

150TPD Recycling Zinc Oxide Kiln Production Line Eaf Dust Rotary Kiln Manufacturer

Product Description

 

Product Name	zno rotary kiln
Suitable for	Zinc oxide, Dolomite, Iron, Limestone, cement, bauxite, Kaolin, Iron Ore , ceramic etc.
Color	Customizable

zno rotary kiln calcines zinc-containing flue ash, iron slag, non-ferrous smelter containing zinc flue ash,
blast furnace ash, zinc ash and other zinc containing raw materials (zinc content 8-20%, lead 2-8%, arsenic less than 1%, sulfur less than 1.5%,silver is greater than 20g/t).Zinc oxide (Zn45-60%,Pb5-8%) was obtained by oxidation roasting and reducing zinc vapor and hot air oxidation at high temperature (1000-1100 ºC) in rotary kiln. Residue calcined in rotary kilns (lead 0.3-0.5%) ,zinc 1-2%, iron 20-30%) can be sold in cement plants or magnetic separation iron.

 

Flowchart Introduction

The main components of the whole set of equipment is feeding system, rotary kiln system, slag water system, dust collecting system. The high temperature (750 ºC) delivered by the rotary kiln and the gases containing various partial oxides and dust are separated for the first time in the settling chamber to dissipate heat and continue to oxidize;
The specific gravity of this dust is larger than that of oxide through the oxide and some dust brought by the cooled gas (300-400 ºC).
The second separation and cooling (temperature < 160 ºC) are achieved through more than 11 groups of multi-tube coolers. About 160°and with very strong oxide and dust gas are carried out by pulse method, dust is separated and cooled, dust falls into ash hopper, gas enters the desulfurization tower, and the temperature drops below 60 ºC.
To bring the The sulfur dioxide gas and other gases entering the desulfurization tower flow upward from the bottom of the tower, while the lye flows from top to bottom in a three-stage mist flow, and moves upward through the change of direction of entry and deceleration of the third stage hollow ball, The final sulfur content of the discharged gas should not exceed 400 mg.
After neutralizing with acid and base, calcium sulfite precipitate will be produced. The water slag will be separated and caged by filter press, and calcium sulfite will be removed as waste residue.

 

Product Parameters

 

Specificatios Model (mm)	The size of the kiln			Yield (t/h)	Speed (r/min)	Electrical power (kw)	Weight (t)	Remarks
	Diameter (mm)	Length (mm)	Gradient (%)
φ1.4×33	1.4	33	3	0.9-1.3	0.39-3.96	18.5	47.5	----
φ1.6×36	1.6	36	4	1.2-1.9	0.26-2.63	22	52	----
φ1.8×45	1.8	45	4	1.9-2.4	0.16-1.62	30	78.2	----
φ1.9×39	1.9	39	4	1.65-3	0.29-2.93	30	77.59	----
φ2.0×40	2	40	3	2.5-4	0.23-2.26	37	119.1	----
φ2.2×45	2.2	45	3.5	3.4-5.4	0.21-2.44	45	128.3	----
φ2.5×40	2.5	40	3.5	9.0-10.5	0.44-2.44	55	149.61	----
φ2.5×50	2.5	50	3	6.25-7.4	0.62-1.86	55	187.37	----
φ2.5×54	2.5	54	3.5	6.9-8.5	0.48-1.45	55	196.29	----
φ2.7×42	2.7	42	3.5	10.0-11.0	0.10-1.52	55	198.5	----
φ2.8×44	2.8	44	3.5	12.5-13.5	0.437-2.18	55	201.58	Suspension preheater kiln
φ3.0×45	3	45	3.5	12.8-14.5	0.5-2.47	75	210.94	----
φ3.0×48	3	48	3.5	25.6-29.3	0.6-3.48	100	237	The kiln, kiln
φ3.0×60	3	60	3.5	12.3-14.1	0.3-2	100	310	----
φ3.2×50	3.2	50	4	40.5-42	0.6-3	125	278	The kiln, kiln

 

Working Site Pictures

 

Company Profile

Henan Hongke Heavy Machinery Co., Ltd. is located in Henan Province which is the cultural base of the central area of China. We are a mining machinery manufacturing enterprise that integrates scientific research, production and marketing.
We are a high-tech enterprise that specializes in the research and production of rotary kilns, dryers, crushers and so on, such as new type of lime rotary kiln, ceramsite kiln, zinc oxide rotary kiln, sludge rotary kiln, chemical rotary kiln, metallurgical rotary kiln, Raymond mill, ultra-fine mill, large and medium dryer, ball mill, sand mill,stone production line, mineral processing equipment and so on.
From the design, production, installation and debugging, we provide you the entire tracking service.We adhere to the aim of high quality to survive, good credibility to make development, and sincerely look forward to cooperating with you!

6.FAQ
 

1. What is the minium order quantity?
One set.
2.How long is the warranty period?
One year. Wearing parts are excluded.
3. What is the after-service of your company?
We can provide the customers foudation drawing, installation service, work training as well as other service according to the
customer's requirements.
4.How long is the delivery time?
About 15 days after we receive the payment.
5. What are the payment terms?
T/T, L/C are the best, it can be adjustable according to different situations.--------------------------------------------------------------------------------------
Kindly Note:
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.
2. Please Inform us the follow figures:
1). Size and content analysis of raw material
2). Capacity ( t/h)
3). Heating Source ( Coal, natural gas or diesel)
Upon we got your message we shall give you our favorable offer in short time.